EnglishFrançaisภาษาไทย

3MB Co., Ltd

Banner3mb-last-modeling-notext-test
Banner3mb-last-modeling-notext-test
Banner3mb-last-molding-notext-test
Banner3mb-last-molding-notext-test
Banner3mb-last-manufacturing-notext-test
Banner3mb-last-manufacturing-notext-test

What Will Drive Growth Composites Growth in the next years

Posted on 20 Mar 2016 in Blog | 0 comments

growth

Since the advent of composites in the manufacturing and assembling industry, the materials have been increasingly used for almost all major and specialized works. The demand for end products that are made with composites has been on significant rise, and this is a promising future for the materials. The rise of composites has been significant in the industries where it is already popular. In the U.S., the composites industry grew at a rate of 6.3% in the past year, which is a significant growth, considering that its value after that increment is $8.2 billion. The most popular composites are glass fibers and polyester resins.

The most important markets for composites have regularly been transportation, construction, pipe and tanks. Although, back in 2013, the United States was the largest consumer of composites, followed by Germany, at the moment, China has overtaken them both and risen to the first position in the amount of composites consumed per capita, making it the largest consumer of composites. In fact, China has always been a high consumer of composites, when it was the largest consumer amongst the BRIC countries (Brazil, Russia, India and China).

Some major consumers and factors that are poised to drive growth of composite usage are:

1. Transportation and automotive

Transportation and automotive is the largest consumer of composite materials, and for an understandable reason. Composites are hard, tensile, strong, and everything that would be expected of them. This makes them a perfect fit for all the automotive needs, where the vehicles need to be lightweight and strong at the same time. Composites are a perfect solution for this combination. The transportation industry has grown in the U.S. over the past many years, consistently, and so has the composite usage. Fiberglass use in interior and exterior of vehicles has been the leading factor that has driven the growth of composites in this segment. Aluminum, high-strength steel and magnesium, along with other composites has been a key driving factor in making the vehicles lightweight, in order to cut down the fuel consumption and emissions. The race is still on and it remains to be seen, which material is going to lead the industry.

2. Aerospace:

Apart from automotive, the aerospace industry has been rampantly using composites in the past few years. In fact, the newer generation aircrafts like Boeing 787 and Airbus 350 have as much as 50% composite content in their construction. In fact, the growth rate in the aerospace industry is even higher than automotive industry, at 10.3%, as opposed to 6.3% of automotive industry, and this (according to projections) is going to make the aerospace industry the highest consumer of composites by 2020. Apart from that, there has been a huge backlog of production of aircraft by both Boeing and Airbus, which has led to a piling demand of composites over the past years. This is sure going to increase in the current year as well.

3. Construction:

The composite use in construction industry also grew significantly over the past few years, at a notable 4.9% growth. This has come due to the switch that developers are making to composite materials which are better and stronger than the traditional brick and mortar counterparts. Also boosting this need is the governmental incentive for retrofitting the old infrastructure like bridges and roads. This has made the construction industry the second largest consumer of composites by volume, at the moment. And this is going to continue, as the constructions are still underway.

4. Pipe and tank:

This is currently one of the most notable composite consuming industry in the market. The pipe and tank industry has been looking for composite materials due to the utility that is seen by the oil and gas producers and also by fuel, waste water and sewage duct producing companies. This is understandable, as composite materials are strong and non-corrosive, according to the composition, which is an apt fit for all the pipes and tanks needs. The demand for composites in this industry increased by 5.2%, and that is amongst the highest among the different industries in the composite spectrum.

5. Renewable energy:

This is a field where composites are an apt solution for all the needs. Since the turbine blades and motors and other materials are meant to be lightweight and high performing, composites come into play. Composites, as expected, are lightweight and strong, along with high stiffness. This makes the turbines and other equipment perform very highly, thus making the increasing market for renewable energy get another boost. This is also boosted by the fact that a large number of wind energy farms have been commissioned by the U.S. government, whose construction would be done in the subsequent years, which would consume composites at a large volume.

The above factors are the main reasons that the composite industry has been doing so well in the recent years. With the increasing rate at which the composite materials have been adopted by the market in the recent years, they are going to take a large share of the entire economy, if the projections are to be believed. This is all for good cause, as composites have been exceptionally able to manage the market demands for light and strong material, which can be molded and customized according to any needs. The trends noted above are supposed to continue in this year, which is poised to be the best year for composite consumption by far.

Send us a message

Your Name (required)

E-mail to:

Subject

Your Message

captcha

Leave a Reply

Your email address will not be published. Required fields are marked *


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>